Schluter - DILEX-KSN Surface Movement Joint Profile Stainless Steel (V2) with Rubber Movement Zone of 7/16" Stone Grey 5/8" x 8' 2-1/2"
Schluter movement joint in ERROR:#REF!. The right piece to finish your installation.
Product details
Schluter movement joint in ERROR:#REF!. The right piece to finish your installation.
Schluter-DILEX-KSN features trapezoid-perforated anchoring legs, made of stainless steel or aluminum, which are secured in the mortar bond coat and provide edge protection for adjacent tiles. The profile separates individual fields in the tile covering and accommodates movement via the 7/16" -wide, soft thermoplastic rubber movement zone, which also forms the visible surface.
The thermoplastic rubber movement zone can be replaced if damaged. DILEX-KSN, with stainless steel anchoring legs, offers secure edge protection for surfaces exposed to heavy-duty commercial traffic (e.g., warehouses, production facilities, or shopping malls).
Key features
- Available in four new colors to simplify the selection of a matching grout
- Designed to allow movement and reduce stress in large, tiled areas
- Eliminates the need for caulking
- Prevents cracking and delamination of tiles
- Maintenance-free
- Offers secure edge protection for surfaces exposed to heavy-duty commercial traffic, such as warehouses, production facilities, and shopping malls
- Piece size: 2.68" × 98.5"
- Material: Stainless Steel (V2)
- Brand
- Schluter
- Collection
- DILEX-KSN
- Colour
- ERROR:#REF!
- Browse category
- Moldings & Trims
- Browse sub-category
- Movement Joint
- Width
- 2.68
- Length
- 98.5
- Installation
- Heavy-Duty Commercial
- Warranty
- 5
- Weight
- 4.26 lb
- SKU
- EKSN160SG
- Material
- Stainless Steel (V2)
- Pieces per box
- 1
- Indoor use
- Yes
- Use on
- Floor
- Use for
- Protect tile edges · To allow movement and reduce stress in large, tiled areas
- Maintenance
- Maintenance-free
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.