Schluter - DITRA-HEAT-DUO-PS Uncoupling Membrane Peel & Stick 2' 7" x 3' 3" - 5/16" (8 mm) (Panel of 8.4 sqft)
The Uncoupling & Underfloor Heating Membranes from Schluter — warms the floor from below for comfort you can feel underfoot.
Buy now
$6.61 /sq ftor 4 payments of $13.88 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Product details
The Uncoupling & Underfloor Heating Membranes from Schluter — warms the floor from below for comfort you can feel underfoot.
Schluter-DITRA-HEAT-DUO-PS is a peel and stick membrane that features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, eliminating the need for thin-set mortar. Quick and easy to install, DITRA-HEAT-DUO-PS is an uncoupling membrane with an integrated bonding fleece that provides sound control, as well as a thermal break.
Optionally, the system can be customized with of DITRA-HEAT-HK floor heating cables to create a warm tiled floor.
Key features
- Simply remove the transparent release film from the fleece side of the membrane to expose the layer of adhesive, and embed into substrate
- No thin-set required to install membrane means a faster and easier installation
- The membrane can easily be repositioned until pressure is exerted
- Features sound control and thermal break
- Reduces impact sound transmission through floor-ceiling assemblies, making it ideal for multi-story construction
- It also reduces heat loss to the substrate and speeds up the response time by up to 70% for underfloor heating syst
- Piece size: 31" × 39" (0.31" thick)
- Covers 8.4 sq ft per box
- Brand
- Schluter
- Collection
- DITRA-HEAT-DUO-PS
- Browse category
- Underlayment & Heating
- Browse sub-category
- Uncoupling & Underfloor Heating Membranes
- Thickness
- 0.3125
- Width
- 31
- Length
- 39
- Coverage
- 8.4 sq ft / box
- SKU
- DHDPS8MA
- Pieces per box
- 1
- Per skid
- 144
- Use with
- DITRA-HEAT-HK
- Radiant heat compatible
- Yes
- Radiant heat type
- Can be customized with of DITRA-HEAT-HK floor heating cables
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.