Schluter - DITRA-HEAT-E-HK Electric Radiant Floor Heating Cable 240V 176.3' (54 sqft)

The Heating Cables from Schluter. A quality pick to round out your flooring job.

Schluter-DITRA-HEAT-E-HK are twisted pair heating cables designed for integration with the DITRA-HEAT uncoupling membrane in interior floor warming applications. IMPORTANT Ordering Information for Schluter®-DITRA-HEAT Cables Do not purchase a heating cable that is the same size as the area to be tiled; you will be left with too much heating cable! Very important: Never CUT or modify the heating cable in any way.

This would change the cable resistance, will cause damage to the cable, and could cause cable overheating. A cable spacing of 3 studs is standard. Cable may also be spaced at continuously alternating 3 stud – 2 stud intervals in isolated areas or over the entire floor.

This practice may be desirable to increase heat output (e.g., over uninsulated on or below grade concrete subfloors) or to consume more cable length in a given area (e.g., when using the standard 3 stud spacing doesn’t allow the selected cable to fit the floor area and respect minimum spacing requirements from walls, partitions, etc.) A cable spacing of 4 studs is not recommended, as it can produce inconsistent floor surface temperatures.

Minimum spacing from walls, partitions, and fixed cabinets is 2" (50 mm). Minimum spacing from other heat sources (baseboard heaters, other fixed heating devices, fireplaces, etc.) is 8" (200 mm). Minimum spacing from any plumbing drain and for