Schluter - DITRA-HEAT-PS Uncoupling Membrane Peel & Stick 2' 7" x 3' 3" - 3/16" (5 mm) (Panel of 8.4 sqft)
Schluter's uncoupling & underfloor heating membranes — warms the floor from below for comfort you can feel underfoot.
Buy now
$3.97 /sq ftor 4 payments of about $8.34 with Klarna or Afterpay
Subject to approval. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Product details
Schluter's uncoupling & underfloor heating membranes — warms the floor from below for comfort you can feel underfoot.
Schluter-DITRA-HEAT-PS is a peel and stick membrane that features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, eliminating the need for thin-set mortar.
Quick and easy to install, DITRA-HEAT-PS integrates customizable, comfortable electric floor warming with the same functions associated with DITRA-HEAT: uncoupling, waterproofing, vapor management, and load support to ensure a long-lasting tile installation.
Key features
- Simply remove the transparent release film from the fleece side of the membrane to expose the layer of adhesive, and embed into substrate
- No thin-set required to install membrane means a faster and easier installation
- The membrane can easily be repositioned until pressure is exerted
- Less mess, less cleanup, and fewer tools required
- The stud structure of DITRA-HEAT-PS is specifically designed to allow for the easy installation of DITRA-HEAT-HK heating cables
- Nominal 1/4" (5.5 mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings
- Piece size: 31" × 39" (0.19" thick)
- Covers 8.4 sq ft per box
- Brand
- Schluter
- Collection
- DITRA-HEAT-PS
- Browse category
- Underlayment & Heating
- Browse sub-category
- Uncoupling & Underfloor Heating Membranes
- Thickness
- 0.1875
- Width
- 31
- Length
- 39
- Coverage
- 8.4 sq ft / box
- SKU
- DHPS5MA
- Pieces per box
- 1
- Per skid
- 135
- Use with
- DITRA-HEAT-HK
- Radiant heat compatible
- Yes
- Radiant heat type
- Can be customized with of DITRA-HEAT-HK floor heating cables
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.