Schluter - DITRA-PS Uncoupling Membrane Sheet Peel & Stick 3' 2-3/4" x 83' 4" - 1/8" (3.5 mm) (269 sqft)
Schluter uncoupling & underfloor heating membranes — brings gentle, even warmth to the floor above it — pair with a compatible thermostat.
Buy now
$3.02 /sq ftor 4 payments of about $202.83 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Product details
Schluter uncoupling & underfloor heating membranes — brings gentle, even warmth to the floor above it — pair with a compatible thermostat.
DITRA-PS brings the benefits of the original DITRA membrane—the multi-tasking underlayment that provides uncoupling, load distribution, waterproofing, and vapor management for durable tile installations—to a convenient peel and stick format. DITRA-PS features a pressure-sensitive adhesive (PSA) on the backside of the membrane, eliminating the need for thin-set mortar to install the membrane.
Key features
- DITRA-PS significantly reduces installation time, labor costs, and cleanup
- Available by the roll or by the sheet to accommodate various room sizes
- DITRA-PS features the same benefits as DITRA, such as easy cut grooves and air release vents at the corners
- 0.13" overall thickness
- Covers 269 sq ft per box
- Brand
- Schluter
- Collection
- DITRA-PS
- Browse category
- Underlayment & Heating
- Browse sub-category
- Uncoupling & Underfloor Heating Membranes
- Thickness
- 0.13
- Width
- 38.75
- Length
- 1000
- Coverage
- 269 sq ft / box
- Weight
- 52.2 lb
- SKU
- DITRAPS25M
- Pieces per box
- 1
- Indoor use
- Yes
- Outdoor use
- No
- Use with
- PRIMER-PS, DITRA-ROLLER
- Storage
- DITRA-PS should be stored in a frost-free environment 41 - 86 °F (5 - 30 °C). If product is exposed to conditions outside of recommended temperature range, product shall be re-acclimated to range for a minimum of 24 hours
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No documents available for this product.
No reviews yet for this product. Be the first to review it after your purchase.