Schluter - JOLLY Wall Tile Flexible Edge Trim Aluminum Polished Chrome Anodized 5/16" (8 mm) x 10'
Schluter tile edge trims in Polished Chrome Anodized. The right piece to finish your installation.
Product details
Schluter tile edge trims in Polished Chrome Anodized. The right piece to finish your installation.
Schluter-JOLLY features a 90° angle and is a finishing and edge-protection profile for the outside corners and other tile edges in wall applications. The vertical wall section of the profile provides a decorative finish and protects adjacent tiles.
Its 90° angle creates a clean, flush look on wall corner installations, and the joint spacers on both sides of the profile ensure consistent grout joints and perfect symmetry. Matching corners are available, which feature innovative plug-in connections that result in clean, visually appealing corner applications.
Key features
- New! Now features a 90° angle and matching corners!
- Prevents tile edges from chipping
- Ideal for creating decorative transitions on walls
- Ideal trim for the top edge of a tiled wall, backsplash, and bathtub surround
- Features an integrated joint spacer that establishes a defined joint cavity between the tile and the profile
- Anchoring leg is available with a radius perforation so that the profile can be used to form curves
- 0.14" overall thickness
- Material: Anodized Aluminum
- Brand
- Schluter
- Collection
- JOLLY
- Colour
- Polished Chrome Anodized
- Browse category
- Tiles
- Browse sub-category
- Tile Edge Trims
- Finish
- Polished
- Thickness
- 0.14
- Length
- 120
- Warranty
- 5
- Weight
- 1.25 lb
- SKU
- R/J80ACG/300
- Material
- Anodized Aluminum
- Pieces per box
- 1
- Indoor use
- Yes
- Outdoor use
- No
- Use on
- Wall · Ideal trim for the top edge of a tiled wall, backsplash, and bathtub surround
- Use for
- Prevents tile edges from chipping · Ideal for creating decorative transitions on walls
- Use with
- JOLLY Corners
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.