Schluter - KERDI-BOARD-SC Prefabricated Shower Curb 4-1/2" x 6" x 38"
Schluter shower curbs. The right piece to finish your installation.
Product details
Schluter shower curbs. The right piece to finish your installation.
Schluter-KERDI-BOARD-SC is a prefabricated shower curb, made of KERDI-BOARD, for use in conjunction with the Schluter-Shower System. KERDI-SHOWER-SC is waterproof and ready for tile, leaving only sealing of joints and corners to complete waterproofing.
The curb can be used in conjunction with KERDI-SHOWER-T/-TS/-TT shower trays or mortar bases and is available in three sizes, 38" x 6" x 4-1/2" (97 x 15 x 11.5 cm), 48" x 6" x 4-1/2" (122 x 15 x 11.5 cm) and 60” x 6” x 4-1/2” (152 cm x 15 cm x 11.5 cm).
Key features
- Designed to integrate with the Schluter-Shower System
- Lightweight, stable, and load bearing
- Waterproof and ready to tile
- Multiple curbs can be installed adjacent to each other for larger showers
- Quick and easy to install
- Piece size: 4.5" × 38"
- Material: Extruded polystyrene foam
- Water-resistant — suitable for kitchens and baths
- Brand
- Schluter
- Collection
- KERDI-BOARD-SC
- Browse category
- Shower Systems
- Browse sub-category
- Shower Curbs
- Width
- 4.5
- Length
- 38
- Warranty
- 10
- Weight
- 1.5 lb
- SKU
- KBSC115150970
- Material
- Extruded polystyrene foam
- Indoor use
- Yes
- Outdoor use
- No
- Water resistant
- Yes
- Shower approved
- Yes
- Vapour barrier
- Yes
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.