Schluter - KERDI-SHOWER-KIT Shower Kit with Center Outlet Position without Grate with 2" PVC Flange 48" x 48"
Schluter's shower base & shower kits. A dependable choice to complete your flooring project.
Product details
Schluter's shower base & shower kits. A dependable choice to complete your flooring project.
This kit contains all the elements of the complete Schluter-KERDI-SHOWER-KIT except the drain grate.
This kit includes : 1 KERDI-SHOWER-T/-TS/-TT shower tray 48" x 48" 1 KERDI-BOARD-SC shower curb 48" x 6" x 4-1/2" 1 roll KERDI waterproofing membrane 3' 3" x 33' = 108 ft2 1 roll KERDI-BAND waterproofing strip 5" x 33' 1 KERDI-DRAIN PVC flange with 2" outlet 4 inside & 2 outside KERDI-KERECK preformed waterproofing corners 1 KERDI-SEAL-PS pipe seal 3/4" 1 KERDI-SEAL-MV mixing valve seal 4-1/2" 1 KERDI collar Please note: Drain grate is sold separately.
Key features
- Designed to create a fully waterproof and vapor-tight enclosure in tiled showers and residential steam showers
- Drain grate must be ordered separately
- Includes shower base and threshold, membrane, and sealing strips
- Please note: Drain grate is sold separately
- Piece size: 48" × 48"
- Material: Polyethylene
- Water-resistant — suitable for kitchens and baths
- 10-year warranty
- Brand
- Schluter
- Collection
- KERDI-SHOWER-KIT
- Browse category
- Shower Systems
- Browse sub-category
- Shower Base & Shower Kits
- Width
- 48
- Length
- 48
- Warranty
- 10
- SKU
- KSK1220PVC
- Material
- Polyethylene
- Pieces per box
- 1
- Indoor use
- Yes
- Water resistant
- Yes
- Shower approved
- Yes
- Includes
- 1 x KERDI-SHOWER-T/-TS/-TT shower tray 48" x 48", 1 x KERDI-BOARD-SC shower curb 48" x 6" x 4-1/2", 1 x roll KERDI waterproofing membrane 3' 3" x 33' = 108 ft2, 1 x roll KERDI-BAND waterproofing strip 5" x 33', 1 x KERDI-DRAIN PVC flange with 2" outlet, 4 x inside & 2 x outside KERDI-KERECK preformed waterproofing corners, 1 x KERDI-SEAL-PS pipe seal 3/4", 1 x KERDI-SEAL-MV mixing valve seal 4-1/2"
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.