Schluter - LIPROTEC-ECD Dimmable LED Driver 24W
Schluter shower hardware. The right piece to finish your installation.
Product details
Schluter shower hardware. The right piece to finish your installation.
Schluter-LIPROTEC-ECD is an in-line dimmable driver that is hard wired into your electrical. It is compatible with a range of popular dimmer switches, allowing you to have matching light switches throughout your bathroom. The available dimming range is 5% to 100% and can control multiple KERDI-BOARD-SNLT niches (up to 24 watts).
The LIPROTEC-ECD includes a metal enclosure and must be installed in an accessible location, such as a closet or vanity.
Key features
- Dimming range: 5% to 100%
- Can control multiple KERDI-BOARD-SNLT niches (up to 24 watts)
- Includes metal enclosure
- Install in an accessible location, such as a closet or vanity
- Dimmer switch must be purchased separately
- UL listed in USA and Canada
- Piece size: 8.5" × 17.5"
- Brand
- Schluter
- Collection
- LIPROTEC-ECD
- Browse category
- Shower Systems
- Browse sub-category
- Shower Hardware
- Width
- 8.5
- Length
- 17.5
- Weight
- 2.81 lb
- SKU
- LTECD1W
- Pieces per box
- 1
- Voltage
- 100-130 VAC
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.