Schluter - RENO-T Solid Brass 17/32" (14 mm) x 8' 2-1/2" Metal T-Shaped Tile Edging Trim
The Tile Edge Trims from Schluter in Gray. A quality pick to round out your flooring job.
Product details
The Tile Edge Trims from Schluter in Gray. A quality pick to round out your flooring job.
Reno-T is designed for transitions between hard surface floor coverings that are the same-height. It can be used to retrofit an existing installation or can be installed during the tile installation. Reno-T overlaps the edges of the floor coverings to protect the edges against damage.
Installation is quick and easy by filling the joint between the floor coverings with an elastomeric sealant, like Schluter-Kerdi-Fix and pressing the profile into the joint.
Key features
- Prevents tile chipping
- Material: Brass
- Rated for residential and commercial use
- Brand
- Schluter
- Collection
- RENO-T
- Colour
- Gray
- Browse category
- Tiles
- Browse sub-category
- Tile Edge Trims
- Width
- 0.531
- Installation
- Commercial / Residential
- Weight
- 1.3 lb
- SKU
- T914M
- Material
- Brass
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.