Colour: CopperSKU RS80AKGB5713 colours in RONDEC-STEP
Schluter · RONDEC-STEP
Schluter RONDEC-STEP Finishing and Edging Profile with 2-1/4" Vertical Leg Anodized Aluminum Brushed Copper 5/16" (8 mm) x 8' 2-1/2"
$65.79/ each
The Corners Edge Profiles from Schluter in Copper — gives edges, transitions and stair steps a clean, finished line.
Quantity
1
× $65.79 / eachProduct details
The Corners Edge Profiles from Schluter in Copper — gives edges, transitions and stair steps a clean, finished line.
Key features
- Material: Anodized Aluminum
- Brushed finish
- 5-year warranty
Trusted on job sites across Canada, Schluter hardware keeps your installation looking sharp for years.
BrushedGlue-down
- Brand
- Schluter
- Collection
- RONDEC-STEP
- Colour
- Copper
- Browse category
- Corners Edge Profiles
- Browse sub-category
- Corners Edge Profiles
- Finish
- Brushed
- Length
- 98.5
- Warranty
- 5
- Weight
- 2.28 lb
- SKU
- RS80AKGB57
- Material
- Anodized Aluminum
- Indoor use
- Yes
- Outdoor use
- No
- Use for
- Countertop and Stair-nosing
- Profile
- Edging profile
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.
You might also like
Schluter
Schluter ECK-E Heavy-Duty Edge-Protection for Outside Corner 90° Profile Stainless Steel (V2) 1/4" (6 mm) x 1-15/32" x 6' 7"
$95.38 /each
Schluter
Schluter FINEC-SQ Finishing and Edge-Protection Profile with a Squared Reveal Aluminum Light Anthracite 1/2" (12.5 mm) x 8' 2-1/2"
$36.40 /each
Schluter
Schluter JOLLY-JUNIOR Profile without a Joint Spacer PVC Sand Pebble 7/16" (11 mm) x 8' 2-1/2"
$4.05 /each
Schluter
Schluter RONDEC-CT Double-Rail Counter Edging Profile Aluminum Beige 5/16" (8 mm) x 8' 2-1/2"
$84.60 /each
Schluter
Schluter SCHIENE Wall Radius Edge Profile with Minimum Reveal Aluminum Pewter 7/16" (11 mm) x 8' 2-1/2"
$42.74 /each
Schluter
Schluter SCHIENE-STEP Stairs Edge Profile with 1-1/2" Vertical Leg Anodized Aluminum Satin 9/16" (15 mm) x 8' 2-1/2"
$50.86 /each