Sigma - Push Manual Tile Cutter Serie XL for Large Size 81"
Sigma's tile cutters — the right tool to make installation faster and cleaner.
Free sample · $9.95 flat shipping, up to 3
Product details
Sigma's tile cutters — the right tool to make installation faster and cleaner.
Designed to be used by professional and DIY, the Sigma 12D1 XL is Sigma’s latest 205 cm tile cutter. With a long base to support porcelain and ceramic tiles, it is the professional tile cutter of choice. The main characteristics of this tile cutter is its precision ability to easily cut most common porcelain and ceramic tiles up to 19mm thick.
Cutting of the tile is achieved by placing the tile against the measurement arm which can swivel in both directions up to 45 degrees allowing a neat and clean cut at any chosen. “XL” Big tile cutter with frame and sliding guide made of light hardened alluminium alloy. The push handle with cushioned engraving, runs completely on ball bearings and stainless steel runners.
Equipped with a double measures for parallel cuts and pivoting support from + 45 ° to -45 °.
Key features
- Every Sigma tile cutter comes with a full 5 year manufactures warranty
- Fitted with easy transport wheels on one end
- Precision cutting of most quality ceramic and porcelain tiles
- Quality materials, all machines are made of high grade aluminium and steel
- The cutting wheel is made from Tungsten steel and is easily replaceable when and if required by the user
- Plastic feet are mounted to the bottom of the breaking arm to ensure no damage to the tile surface during the breaking process
- Material: Light Hardened Aluminum Alloy & Stainless Steel
- Brand
- Sigma
- Collection
- Serie XL
- Browse category
- Tiles
- Browse sub-category
- Tile Cutters
- Weight
- 79.37 lb
- SKU
- 12D1
- Material
- Light Hardened Aluminum Alloy & Stainless Steel
- Pieces per box
- 1
- Use for
- Porcelain tiles · Especially suited to uneven and riven faced tiles
- Includes
- Double lateral measures for parallel cuts · Spring loaded scoring system · 13 mm scoring wheel
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.