Sika - Epoxy Coating Sikagard Duroplast-100 N Special Colour Part A + B - 5 gal
The Epoxy Coating from Sika. A quality pick to round out your flooring job.
Product details
The Epoxy Coating from Sika. A quality pick to round out your flooring job.
Sikagard Duroplast-100 N is a two-part, high solids, low odour, low VOC, finely textured, glossy, pigmented epoxy wall coating. It produces a durable, easy to clean ceramic-like finish on interior surfaces. Can be applied over properly prepared and primed concrete, concrete masonry, common steel, or gypsum board substrates.
It is also used as binder for multi-layered, glass fabric-reinforced wall lining systems that improve the durability of gypsum board against impact. Sikagard Duroplast-100 N contains an antimicrobial additive that inhibits the growth of bacteria, molds, mildew and fungi for the lifetime of the coating.
- Brand
- Sika
- Browse category
- Epoxy Coating
- Browse sub-category
- Epoxy Coating
- SKU
- 532487
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.