Sika - Primer Sikafloor - 222 W ESD Black 5.68 L
The Primers from Sika in Black. A quality pick to round out your flooring job.
Product details
The Primers from Sika in Black. A quality pick to round out your flooring job.
Sikafloor-222 W ESD is a two-component, water-based epoxy conductive primer with high electrostatic conductivity. It is designed specifically for use in combination with Sikafloor-200C ESD, Sikafloor-260 ESD and Sikafloor-270 ESD electrostatic conductive coating systems.
Sikafloor-222 W ESD will impart static dissipative resistance readings when applied over new or existing concrete substrates or existing epoxy floors that have been primed with an adhesion and isolation layer of Sikafloor-156CA, Sikafloor-1610 or Sikafloor-261CA.
Key features
- Consistent resistance measurements are obtained when testing in accordance with standard methods
- Provides a highly conductive ground plane
- Does not depend on relative humidity for conductive properties
- Maintains electrical conductivity throughout the entire thickness of the system
- Water-based, solvent-free, very low VOC content
- Low odour formulation suitable for application in occupied facilities
- Brand
- Sika
- Collection
- Sikafloor - 222 W ESD
- Colour
- Black
- Browse category
- Setting Materials
- Browse sub-category
- Primers
- SKU
- 554555
- Pieces per box
- 1
- Use with
- Sikafloor-260 ESD and Sikafloor-270 ESD electrostatic conductive coating systems
- TVOC emissions
- 34 g/L
- Cure time
- 2 to 6 days
- Shelf life
- 12 months when stored in original, unopened packaging
- Mixing ratio
- A:B= 1:4.57 by volume (mix full units only)
- Storage
- Store dry at temperatures between 5 °C to 32 °C (41 °F to 89 °F). Protect from freezing. If frozen, discard.
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.