Sika - Sikafloor-31 Na Purcem 1.93 kg
Sika grout — locks tile and stone down with a strong, reliable bond.
Product details
Sika grout — locks tile and stone down with a strong, reliable bond.
Sikafloor -31 NA PurCem is state-of-the-art, high-build coating with a matte finish, based upon pthalate-free, water dispersed polyurethane/cement and aggregate technology applied at 10 mils per coat. It is designed as a standalone coating for concrete, as primer/sealer for Sikafloor -24 NA PurCem and as a top coat for Sikafloor PurCem broadcast textured systems.
It is an economical and versatile material that improves adhesion and mitigates outgassing of substrates as a primer, while providing excellent chemical resistance properties and very good durability against abrasion and mechanical damage. Sikafloor -31 NA PurCem represents superior polyurethane/cement technology, combining easier application, resistance to blistering and improved performance.
Key features
- Can be applied onto 7 to 10 day old concrete after adequate preparation and where substrate has tensile bond strength in excess of 1.5 MPa (218 psi)
- Economical and easy installation requiring less labour to install than traditional Sikafloor PurCem materials
- Versatile material suitable for application as a primer, standalone coating and top coat for other PurCem systems
- Brand
- Sika
- Browse category
- Setting Materials
- Browse sub-category
- Grout
- SKU
- 462185
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.