Tarkett - Edge Guard - EG TA6 G for 5/16" Material to Floor #TA6 Bedrock 12'
The Vinyl Moldings from Tarkett in Bedrock — matches your floor to trim out doorways, edges and stairs.
Buy now
$2.82 /sq ftor 4 payments of about $8.47 with Klarna or Afterpay
Subject to approval. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Free sample · $9.95 flat shipping, up to 3
Product details
The Vinyl Moldings from Tarkett in Bedrock — matches your floor to trim out doorways, edges and stairs.
Modern design schemes present opportunities that go beyond rooms using carpet and other flooring in traditional ways. When you need to transition from, say, modular carpet squares used as an area rug to concrete, the edges need to be protected-both for durability and safety reasons. Johnsonite Edge Guards are the perfect way to maintain the integrity of your carpet tiles and prevent gaps that could cause accidents.
They come in multiple sizes and for all types of materials, so they're highly versatile.
Key features
- Available in 6 profiles
- Protect edge of material up to 3/8" (9.5 mm) thick
- Available in 32 colors
- Plank size: 2.38" × 144" (0.31" thick)
- Material: PVC
- Covers 12 sq ft per box
- FloorScore certified for indoor air quality
- Brand
- Tarkett
- Collection
- Edge Guard
- Colour
- Bedrock
- Browse category
- Vinyl
- Browse sub-category
- Vinyl Moldings
- Thickness
- 0.31
- Width
- 2.38
- Length
- 144
- Coverage
- 12 sq ft / box
- Weight
- 2.4 lb
- SKU
- 440214047
- Material
- PVC
- Pattern
- Solid
- Design
- EG-XX-G
- Pieces per box
- 12
- Per skid
- 240
- Chemical resistance
- Pass
- Slip resistance
- SCOF ≥ 0.5
- Flammability
- Class 1 (mean average CRF: 0.45 w/sq cm or higher)
- FloorScore certified
- Yes
- TVOC emissions
- 0.5 mg/m³
- Phthalate content
- 0%
- Recycled content
- 14%
- Certifications
- LEED, WELL, Living Building Challenge
- Commercial warranty (years)
- 2
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.