Tarkett - Feature Strips - FS 40 DW3 50'
The Accessibility Moldings from Tarkett in Black — matches your floor to trim out doorways, edges and stairs.
Product details
The Accessibility Moldings from Tarkett in Black — matches your floor to trim out doorways, edges and stairs.
When designing for healthcare, education-even large factories or stores-way finding often comes into play. It's a visually dynamic and clear way to direct the flow of traffic and to help people find their way. Johnsonite Feature Strips are installed into the floor itself, creating a strip of solid, differentiated color.
They can also be used as a purely decorative element, adding dimension and texture to large areas of, for instance, resilient flooring, or to create a grid or other pattern.
- Brand
- Tarkett
- Collection
- Feature Strips
- Colour
- Black
- Browse category
- Moldings & Trims
- Browse sub-category
- Accessibility Moldings
- Width
- 1
- Length
- 600
- Weight
- 8.8 lb
- SKU
- 440235021
- Pattern
- Solid
- Design
- FS 40 DW3
- Colour tone
- Dark
- Pieces per box
- 1
- Chemical resistance
- Pass
- Flammability
- Class 1 (mean average CRF: 0.45 w/sq cm or higher)
- FloorScore certified
- Yes
- TVOC emissions
- ≤ 100 µg / m³
- Recycled content
- 15%
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.