Colour: Burnt UmberSKU 44073001624 colours in Perceptions Designer Wall Base
Tarkett · Perceptions Designer Wall Base
Tarkett - Perceptions Designer Wall Base - RWDC 63 G 4.25 X 120 1/8 Contour TOE 4-1/4" #63 Burnt Umber - Wall Base 120'
$345.75/ each
The Rubber Wall Base from Tarkett in Burnt Umber — protects the bottom of the wall and covers the floor's expansion gap.
Quantity
1
× $345.75 / eachProduct details
The Rubber Wall Base from Tarkett in Burnt Umber — protects the bottom of the wall and covers the floor's expansion gap.
The entire idea of wall base is looking up with our Perceptions Design collection. With 5 dramatic designer profiles, over 115 palette-pleasing colors and seamless coordination with our Millwork Wall Finishing System, adding architectural flair has never been easier.
Key features
- 0.13" overall thickness
- Material: Thermoplastic Rubber
- FloorScore certified for indoor air quality
Glue-down
- Brand
- Tarkett
- Collection
- Perceptions Designer Wall Base
- Colour
- Burnt Umber
- Browse category
- Rubber Wall Base
- Browse sub-category
- Rubber Wall Base
- Thickness
- 0.13
- Width
- 4.25
- Weight
- 39 lb
- SKU
- 440730016
- Material
- Thermoplastic Rubber
- Pattern
- Solid
- Design
- RWDC 63 G 4 1/4 X 120 Contour 4 1/4" 63 Burnt Umber
- Pieces per box
- 1
- Chemical resistance
- Pass
- Slip resistance
- SCOF ≥ 0.8
- Flammability
- Class 1 (mean average CRF: 0.45 w/sq cm or higher)
- Smoke density
- < 450
- FloorScore certified
- Yes
- Phthalate content
- No
- Recycled content
- 0.14
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.
You might also like
Tarkett
Tarkett - Baseworks Thermoset Rubber (Type TS) - TSBT 40 Toeless 4" #40 Black - Wall Base 120'
$368.31 /each
Tarkett
Tarkett - Duracove Thermoplastic Rubber 1/8" (Type TP) - DCT 82 6 X 100 1/8 Toeless Duracove 6" #82 Black Pearl - Wall Base 100'
$337.08 /each
Johnsonite
Johnsonite Masquerade - #ML3 Concrete Charcoal - Wallbase 4' (Pack of 30)
$469.25 /each
Johnsonite
Johnsonite Masquerade Wall Finishing System - MB MS4 Traditional Cove Base 4" #MS4 Darkened Wenge - Wall Base 8' (Pack of 15)
$469.25 /each
M-D PRO
M-D PRO - Cove Base Coil Rubber #052 Black Brown 4" x 120'
$282.00 /each
M-D PRO
M-D PRO - Rubber Base #058 Windsor Blue 4" x 120'
$282.00 /each
M-D PRO
M-D PRO - Rubber Wall Base Coil Mauve #053 2 1/2" x 120'
$207.90 /each
M-D PRO
M-D PRO - Rubber Wall Base Roll RR400 - #ST283 Flagstone - 4" (101.6 mm) x 1/8" x 120'
$282.00 /each