Wedi - Fundo Square Drain Cover Set 3.1 - Pebbles Design - 4" × 4"
The Standard Drains & Grates from Wedi. A quality pick to round out your flooring job.
Product details
The Standard Drains & Grates from Wedi. A quality pick to round out your flooring job.
For use with Wedi Fundo Primo, Ligno, Onestep, Trollo, Nautilo bases. Tileable cover plate surface is elevated 1/16 in. over tile surface of a Fundo base. For a flush tile installation, Wedi Joint Sealant spot bonding may be used to install the tile inside the cover so height is reduced versus the thinset bed build up under the tile on the shower base. 1 drain cover, stainless steel. 1 Frame, stainless steel.
- Brand
- Wedi
- Browse category
- Shower Systems
- Browse sub-category
- Standard Drains & Grates
- SKU
- US1000024
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.