Wedi - Shower Kit S-DRY with Tray of 38" x 64" and Center Drain Outlet
Wedi shower base & shower kits. The right piece to finish your installation.
Product details
Wedi shower base & shower kits. The right piece to finish your installation.
A complete kit consisting of all parts needed to build a wedi S-DRY Shower System.
Kit includes: wedi S-DRY Shower Kit includes : 1 wedi S-DRY Shower Base, 1 wedi S-DRY Shower Curb (in two halves), 2 sets of wedi S-DRY Inside Corners 90, 1 set of wedi S-DRY Outside Corners 90, 1 wedi S-DRY Mixing Valve Seal, 1 wedi S-DRY Shower Pipe Collar, 1 wedi S-DRY Tape, 1 roll of wedi S-DRY Waterproof Membrane, wediS-DRY SEAL Trowel to waterproof assembly seams.
Base can be cut to size, is unfolded and thinset mortar adhered to subfloors. wedi S-DRY SEAL and wedi S-DRY Drain Cover sold separately.
Key features
- Included: wedi S-DRY Shower Base - a pre-sloped and waterproof shower base with factory integrated drain
- Included: wedi S-DRY - a waterproof and vapor retardant sheet membrane for installation over pre-existing wall boards including cement board or drywall
- Included: wedi S-DRY Shower Curb - a prefabricated waterproof curb delivered in two halves which can be joined or made to a needed length during installation
- Included: prefabricated wedi S-DRY corner tapes, pipe collars, mixing valve collar and sealing tape needed for the installation
- Piece size: 38" × 64"
- Brand
- Wedi
- Collection
- S-DRY
- Browse category
- Shower Systems
- Browse sub-category
- Shower Base & Shower Kits
- Width
- 38
- Length
- 64
- Weight
- 64 lb
- SKU
- US2076001
- Pieces per box
- 1
- Shower approved
- Yes
- Includes
- 1 x S-DRY Shower Base, 1 x S-DRY Shower Curb in two halves, 2 x sets of S-DRY Inside Corner 90, 1 x set of wedi S-DRY Outside Corner 90, 1 x S-DRY Mixing Valve Seal, 1 x S-DRY Shower Pipe Collar, 1 x S-DRY Tape, 1 x roll of S-DRY Waterproof Membrane
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.