Appalachian Flooring Engineered Hardwood Alta Moda Hard Maple Excel Crepe 5" - 1/2"
Appalachian Flooring Alta Moda engineered hardwood in Crepe sets the tone with an inviting, refined look that lifts any space. From the Alta Moda collection by Appalachian Flooring, every detail is designed to hold up to real life.
Buy now
$9.58 /sq ftor 4 payments of about $80.80 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Often bought with this floor
3% off these in your cart when you buy them with your floor.
Free sample · $9.95 flat shipping, up to 3
Product details
Appalachian Flooring Alta Moda engineered hardwood in Crepe sets the tone with an inviting, refined look that lifts any space. From the Alta Moda collection by Appalachian Flooring, every detail is designed to hold up to real life.
Key features
- 0.5" overall thickness
- Material: Wood
- Covers 33.75 sq ft per box
- Uv urethane finish with wirebrushed texture
- Surface treatment: Evershine
- Installs by glue, nail, staple or float
- Made in North America
Designed to make the space unmistakably yours, with everything you need to install it available right here.
- Brand
- Appalachian Flooring
- Collection
- Alta Moda
- Colour
- Crepe
- Browse category
- Hardwood
- Browse sub-category
- Engineered Hardwood
- Flooring type
- Prefinished
- Finish
- UV Urethane
- Species
- Hard Maple
- Construction
- Multi-ply
- Thickness
- 0.5
- Width
- 5
- Edge
- Micro Bevel
- Gloss
- <5%
- Surface
- Wirebrushed
- Installation
- Glue/Nail/Staple/Float
- Coverage
- 33.75 sq ft / box
- Weight
- 91.13 lb
- SKU
- D595012B6
- Material
- Wood
- Core type
- Multi-ply
- Wear layer finish
- UV Urethane
- Surface treatment
- Evershine
- Grade level
- On, above or below grade
- Grade
- Excel
- Attached underpad
- No
- Radiant heat compatible
- Yes
- Radiant heat type
- Hydronic Heat Only
- Country of origin
- North America
- Cut
- Plain Sawn
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Dust-mop or vacuum with a soft brush; clean with a hardwood-specific cleaner only.
- Never wet-mop — wipe spills immediately and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.
Everything else you'll need
Underlay, trims, adhesive and tools that suit this type of floor. These are not colour-matched to this collection — check the finish before you order.