Colour: WhiteSKU CARL400033 colours in AcrylPro
White
Custom Building Products · AcrylPro
Custom Building Products - Professionnal Tile Adhesive AcrylPro White 3.5 gal
$107.35/ each
Custom Building Products ceramic tile adhesives in White — holds your flooring firmly and permanently in place.
Quantity
1
× $107.35 / eachProduct details
Custom Building Products ceramic tile adhesives in White — holds your flooring firmly and permanently in place.
Professional grade tile and stone adhesive. Engineered for the intermittent water exposure seen in tub surrounds and shower walls. Sag resistant and ideal for small format tile, pavers and stone installation on walls, floors and countertops. Recommended for tile up to 8″ (20 cm) on any side, but can be used up to 15″ (38.1 cm) with significantly longer dry times.
Key features
- For standard wall and floor tile installations
- Just spread and set
- Ideal for small format tile
- Sets porcelain, ceramic and stone
- 1-year warranty
- Rated for residential and commercial use
Glue-down
- Brand
- Custom Building Products
- Collection
- AcrylPro
- Colour
- White
- Browse category
- Tiles
- Browse sub-category
- Ceramic Tile Adhesives
- Installation
- Residential & Commercial
- Warranty
- 1
- Weight
- 29.19 lb
- SKU
- CARL40003
- Pieces per box
- 1
- Indoor use
- Yes
- Outdoor use
- No
- Use on
- Wall & Floor
- Use for
- Vitreous, semivitreous or nonvitreous tile: ceramic impervious porcelain, mosaic, quarry tile, slate and natural stone
- Radiant heat compatible
- No
- Antimicrobial
- Resistance to Mold Growth (A136.1 Section 6.4): Pass
- LEED
- May contribute towards LEED Certification · Complies with all Federal, SCAQMD, and CARB standards for VOC's
- Cure time
- Minimum dry time for 8” x 8” (20.3 cm x 20.3 cm) tile is 24-72 hours before applying grout. Dry time will be extended if using larger tiles, bonding to non-porous surfaces, in high humidity, or if temperature is below 60 degrees F (15 degrees C)
- Storage
- Protect from freezing & Store in a cool, dry area
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.
You might also like
Laticrete
Laticrete - Floor Mud 209 - to mix with 3701 - Grey 60 lb
$25.25 /each
Laticrete
Laticrete - Thick Bed Mortar 226 - to mix with 3701 - Grey 60 lb
$26.44 /each
Henry
Henry - 237 AcoustiGum Acoustical Ceiling Tile Adhesive - 15.14 L
$157.05 /each
Laticrete
Laticrete - 3701 Fortified Mortar Bed Grey 60 lb
$57.29 /each
Tec
Tec UnSanded Tile Caulk AccuColor #933 Standard Gray 310 ml
$26.41 /each
Cascade Aqua-Tech
Cascade Aqua-Tech - Dow Tub N Tile Clear
$13.35 /each
Cascade Aqua-Tech
Cascade Aqua-Tech - Dow Tub N Tile Translucent White
$13.35 /each
Cascade Aqua-Tech
Cascade Aqua-Tech - Dow Tub N Tile White
$13.35 /each