Custom Building Products - Self-Leveling Underlayment TechLevel Lite - 13 mm 30 lb
Custom Building Products' levelers — the mortar and setting base that keeps your installation solid for years.
Product details
Custom Building Products' levelers — the mortar and setting base that keeps your installation solid for years.
TechLevel Lite Self Leveling Underlayment is a high quality flowable hydraulic cement underlayment/self leveling underlayment formulated with CustomLite Technology technology, TechLevel Lite is 40% lighter than other self-leveling underlayment, making it easier to pour and carry. Weighing just 3 lbs. (1.36 kg) per square foot at 1/2″ (13 mm) thickness, it is 3 lbs.
(1.36 kg) lighter than traditional underlayment and excellent for installations where weight is a concern. A 30 lb. (13.6 kg) bag covers the same area as a 50 lb. (22.6 kg) bag. TechLevel Lite helps flatten or level floors prior to the installation of ceramic tile, natural stone, resilient flooring, carpet, wood and other floor coverings.
This quick-setting underlayment can be applied up to 2″ (5 cm) thick in one pour and seek its own level in minutes. TechLevel Lite may be applied to in residential structures with floor joints up to 24″ o. c.
Formulated using Controlled Cure Technology, TechLevel Lite helps eliminate installation problems such as bond failure, crumbling and staining of resilient flooring caused by the free moisture found in traditional underlayment. Leveling requires surveying and setting leveling pins as guides for placing mortar. Refer to ANSI A118.16 & A108.21.
Key features
- Lightweight, sustainable formula
- superior handling & weight reduction
- Apply from
- 0.5" overall thickness
- Material: Hydraulic Cement
- Brand
- Custom Building Products
- Collection
- TechLevel Lite
- Browse category
- Underlayment & Heating
- Browse sub-category
- Levelers
- Thickness
- 0.5
- Weight
- 30 lb
- SKU
- TLLW30T
- Material
- Hydraulic Cement
- Pieces per box
- 1
- Hardness
- 2-4 hours
- Cure time
- 16 hours
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.