CustomTech - Moisture Vapor and Alkalinity Barrier Kit TechMVC 2.65 gal
The Liquid Vapor Barriers & Retardants from CustomTech — quiets footsteps and evens out the subfloor beneath your new floor.
Product details
The Liquid Vapor Barriers & Retardants from CustomTech — quiets footsteps and evens out the subfloor beneath your new floor.
CustomTech TechMVC 100% Solids Epoxy Moisture Vapor Control is a true single coat, moisture and alkali- resistant, two-component, rapid cure 100% solids epoxy coating specifically formulated to control concrete moisture vapor emission and alkalinity beneath finished flooring. TechMVC may be used on concrete substrates measuring up to 100% RH.
The single-coat application effectively controls concrete moisture emission and creates an alkaline barrier between the substrate and adhered flooring materials. For professional use only.
Key features
- One coat application
- Solvent-free
- Low viscosity formula
- Reduces moisture vapor transmission of concrete
- Two part system components as follows: Part A: 1.73 gal (Translucent Brown) & Part B: 0.92 gal (Amber Clear)
- Brand
- CustomTech
- Collection
- TechMVC
- Browse category
- Liquid Vapor Barriers & Retardants
- Browse sub-category
- Liquid Vapor Barriers & Retardants
- Warranty
- 101525
- Weight
- 21.5 lb
- SKU
- TECHMVCK
- Outdoor use
- No
- TVOC emissions
- 24 g/L
- Cure time
- 4 hours
- Mixing ratio
- 1 Part A for 1 Part B
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.