SKU AHK1S100MBW
Schluter
Dilex-Ahk Cove Base 3/8 Alum Matte White
$54.73/ each
The Cove Shaped Profiles from Schluter. A quality pick to round out your flooring job.
Quantity
1
× $54.73 / eachProduct details
The Cove Shaped Profiles from Schluter. A quality pick to round out your flooring job.
Trusted on job sites across Canada, Schluter hardware keeps your installation looking sharp for years.
Glue-down
- Brand
- Schluter
- Browse category
- Moldings & Trims
- Browse sub-category
- Cove Shaped Profiles
- Weight
- 1.06 lb
- SKU
- AHK1S100MBW
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No documents available for this product.
No reviews yet for this product. Be the first to review it after your purchase.
You might also like
Futura Transitions
Futura Transitions - 1/8" Coving Cap Mill Finish Anodized -12'
$11.01 /each
Tarkett
TightLock Carpet TDC 121 3-1/4" #121 Cement - Wall Base 75'
$2.97 /sq ft$222.78/box
M-D PRO
M-D PRO - Cove Cap, Stainless Steel - 1/10" x 1-3/16" x 8'
$36.00 /each
Tarkett
Cove Caps - CCC TA4 C for 1/4" Thick Carpet #TA4 Gateway 12'
$19.40 /each
Schluter
Schluter - Designbase-SL Wall Base Profile DESIGNBASE-SL - Aluminum Brushed Stainless Appearance 2-3/8" (60 mm) x 8' 2-1/2"
$118.46 /each
Schluter
Schluter - Designbase-SL Wall Base Profile DESIGNBASE-SL - Stainless Steel (V2) Brushed 4-3/8" (110 mm) x 8' 2-1/2"
$161.40 /each
Schluter
Dilex-Ahk Cove Base 5/16 Alum Dark Anthr
$67.44 /each
M-D PRO
M-D PRO - Resilient Cove Cap Stainless Steel 1/8" (3.2 mm) x 6" x 6"
$9.25 /each