SKU DBSL60AEEB15 colours in DESIGNBASE-SL
Schluter · DESIGNBASE-SL
Schluter - Designbase-SL Wall Base Profile DESIGNBASE-SL - Aluminum Brushed Stainless Appearance 2-3/8" (60 mm) x 8' 2-1/2"
$118.46/ each
The Metal Molding from Schluter — matches your floor to trim out doorways, edges and stairs.
Quantity
1
× $118.46 / eachProduct details
The Metal Molding from Schluter — matches your floor to trim out doorways, edges and stairs.
Schluter-DESIGNBASE-SL is a finishing profile used as an alternative to baseboards.
Key features
- Quick and easy installation with appropriate adhesive
- 90° inner and outer corners, fittings, end caps and sealing lip available
- Brushed stainless steel baseboard option with rounded base for commercial spaces where hygiene is a priority
- 0.47" overall thickness
- Material: Aluminum
- Brushed stainless appearance finish
- 5-year warranty
Brushed Stainless AppearanceGlue-down
- Brand
- Schluter
- Collection
- DESIGNBASE-SL
- Browse category
- Moldings & Trims
- Browse sub-category
- Metal Molding
- Finish
- Brushed Stainless Appearance
- Thickness
- 0.47
- Length
- 98.5
- Warranty
- 5
- Weight
- 1.73 lb
- SKU
- DBSL60AEEB
- Material
- Aluminum
- Pieces per box
- 1
- Per skid
- 1
- Indoor use
- Yes
- Use for
- Tile or other floor coverings
- Profile
- Wall base profile
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.
You might also like
Futura Transitions
Futura Transitions - 1/8" Coving Cap Mill Finish Anodized -12'
$11.01 /each
Tarkett
TightLock Carpet TDC 121 3-1/4" #121 Cement - Wall Base 75'
$2.97 /sq ft$222.78/box
M-D PRO
M-D PRO - Cove Cap, Stainless Steel - 1/10" x 1-3/16" x 8'
$36.00 /each
Tarkett
Cove Caps - CCC TA4 C for 1/4" Thick Carpet #TA4 Gateway 12'
$19.40 /each
Schluter
Schluter - Designbase-SL Wall Base Profile DESIGNBASE-SL - Stainless Steel (V2) Brushed 6-3/8" (160 mm) x 8' 2-1/2"
$226.30 /each
Schluter
Dilex-Ahk Cove Base 3/8 Alum Matte White
$54.73 /each
Schluter
Dilex-Ahk Cove Base 5/16 Alum Dark Anthr
$67.44 /each
M-D PRO
M-D PRO - Resilient Cove Cap Stainless Steel 1/8" (3.2 mm) x 6" x 6"
$9.25 /each