Laticrete - Nxt Level Plus Lite Grey 27 lb
Laticrete's levelers in Grey — the mortar and setting base that keeps your installation solid for years.
Product details
Laticrete's levelers in Grey — the mortar and setting base that keeps your installation solid for years.
NXT Level Plus Lite is a premium lightweight, fiber-reinforced, pumpable, cement-based underlayment designed for leveling a variety of interior projects using concrete, plywood, OSB, or gypsum substrates prior to the application of floor coverings. At nearly half the cured weight of a standard self-leveling underlayment (SLU), it’s a great option for installations with load-bearing concerns.
It is also a single step application requiring no cap layer. Safer and easier to carry and handle, NXT Level Plus Lite is 50% lighter in packaging weight than traditional self-leveling underlayment products and contains no respirable crystalline silica levels that exceed the OSHA action level.§ This versatile, rapid-setting self-leveling underlayment is pump-friendly and pourable up to 4" (102 mm) in depth.
NXT Level Plus lite provides consistent results and produces a flat, smooth, and hard surface in as soon as 24 hours.
Key features
- Moisture sensitive floor goods can be applied quickly, as soon as 24 hours after pouring, non-moisture sensitive flooring can be placed at 3 to 4 hours
- Direct replacement for LATICRETE SUPERCAP SC500-LW
- No capping is required - Single step placement
- Can be applied over Plywood and OSB without the use of a metal lath
- Can be applied from 1/8" to 4" (3.17 mm to 101.6 mm) and tapered to zero at edges (concrete substrates) -- Can be applied from 1/4" to 4" (6.35 mm to 101
- Rated for commercial use
- Brand
- Laticrete
- Collection
- Nxt Level
- Colour
- Grey
- Browse category
- Levelers
- Browse sub-category
- Levelers
- Installation
- Commercial
- Weight
- 27 lb
- SKU
- 0919-0027-21
- Pieces per box
- 1
- Per skid
- 56
- Indoor use
- Yes
- Outdoor use
- No
- Use on
- Floors
- Use for
- Leveling interior plywood/OSB, gypsum and concrete substrates
- Antimicrobial
- Yes
- Cure time
- 3-4 hours
- Shelf life
- 12 months if unopened
- Storage
- Material should be kept in a cool, dry location prior to application.
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.