Mapei - Mapesil T Plus Silicone Sealant #5231 Deep Ocean 299 ml
Mapei silicones & sealants in Deep Ocean — the bond that keeps planks, tile or trim exactly where they belong.
Product details
Mapei silicones & sealants in Deep Ocean — the bond that keeps planks, tile or trim exactly where they belong.
Mapesil T Plus is a professional-grade, 100%-silicone sealant with enhanced adhesion for use on multiple substrates. This product is specifically formulated for heavy traffic and expansion/movement joints exceeding both ASTM and ANSI standards.
Mapesil T Plus adheres to most ceramic tile, porcelain, natural stone, glass, masonry, concrete, brick, wood, aluminum, fiberglass, vinyl, plastic, and properly prepared copper and brass.
Key features
- Color-matched to MAPEI’s color palette
- Formulated to a low sheen to match the gloss of grout joints
- Rated for heavy-traffic and expansion/movement joints
- Excellent elongation and flexibility for use in both change-of-plane and joint applications in tile or stonework
- Helps to prevent mold and mildew
- Material: 100% Silicone
- Rated for residential and commercial use
- Brand
- Mapei
- Collection
- Mapesil T Plus
- Colour
- Deep Ocean
- Browse category
- Setting Materials
- Browse sub-category
- Silicones & Sealants
- Installation
- Residential & Commercial
- SKU
- 3BU523191
- Material
- 100% Silicone
- Pieces per box
- 1
- Per skid
- 1296
- Indoor use
- Yes
- Outdoor use
- Yes
- Use on
- Ceramic tile, porcelain, natural stone, glass, masonry, concrete, brick, wood, aluminum, fiberglass, vinyl, plastic, and properly prepared copper and brass
- Use for
- As a flexible barrier/filler between horizontal/vertical surfaces and any other changes of plane · Expansion joints in non-traffic, normal-traffic and heavy-traffic areas · Countertops, vanities, sinks, bathtubs, showers, steam rooms, pools, spas, backsplashes and fixtures
- Hardness
- Shore “A” hardness (ASTM C661) 35 or greater (Exception: 17 to 19 for #23 Clear color)
- TVOC emissions
- 50 g per L or less
- Cure time
- 28 days depending on ambient temperature, substrate temperature and humidity at 73°F (23°C) and 50% relative humidity
- Shelf life
- 18 months when stored in original, unopened packaging at 73°F (23°C) and 50% relative humidity
- Storage
- Application: 40°F to 90°F (4°C to 32°C) · Service: -60°F to 400°F (-51°C to 204°C)
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.