Progress Profiles - Shower Molding PROBATH PVC White 13/16" (20 mm) x 8' 2-7/16"
The Shower Moldings from Progress Profiles in White — part of a sealed, waterproof shower system from base to wall.
Product details
The Shower Moldings from Progress Profiles in White — part of a sealed, waterproof shower system from base to wall.
PROBATH 20 & 15 are Rigid/Soft co-extruded hygienic concave square connectors to apply between walls and work tops (ex. coverings). Very suitable for traditional and Whirlpool baths, shower units etc. It facilitates the cleaning in the inner angles and prevents from the appearance of silicone that has been blackened by time. Resistant to detergents and solvents normally used for interior cleaning.
In co-extruded anti-mould non toxic shockproof vinyl resin and white flexible. Outer/inner and three ways angles connectors, the locking caps and the joints facilitate and improve the laying. Available only for PROBATH 20 & PROBATH FLEX 20 models.
- Brand
- Progress Profiles
- Collection
- PROBATH
- Colour
- White
- Browse category
- Moldings & Trims
- Browse sub-category
- Shower Moldings
- Width
- 0.79
- Length
- 98.43
- SKU
- PSB20-01
- Material
- PVC
- Pieces per box
- 1
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.