Schluter - DECO-SGC Shower Support Profile for Glass Partitions Anodized Aluminum Satin 7/16" (11 mm) x 1/2" (12.5 mm) x 8' 2-1/2"
Schluter's schluter - deco-sgc shower support profile for glass partitions anodized aluminum satin 7/16" (11 mm) x 1/2" (12.5 mm) x 8' 2-1/2" in Satin Anodized. A dependable choice to complete your flooring project.
Product details
Schluter's schluter - deco-sgc shower support profile for glass partitions anodized aluminum satin 7/16" (11 mm) x 1/2" (12.5 mm) x 8' 2-1/2" in Satin Anodized. A dependable choice to complete your flooring project.
Decorative profile featuring a 1/2" (12.5 mm) or 9/16" (15 mm) -wide channel used as a vertical support for glass walls in recessed showers that border on untiled walls, creating a 90° angle between the glass partition and the untiled wall.
The 1/2" (12.5 mm) wide channel accommodates glass walls up to a thickness of 3/8" (10 mm), and the 9/16" (15 mm) wide channel accommodates glass walls up to a thickness of 1/2" (12.5 mm).
Key features
- Wall profile with channel to support glass walls up to a thickness of 3/8" (10 mm) or 1/2" (12.5 mm)
- For corners that border untiled walls
- Features a trapezoid perforated anchoring leg that is secured in the bond coat beneath the tile
- Available in anodized aluminum
- Available in two widths and four heights
- Piece size: 0.5" × 98.5"
- Material: Anodized Aluminium
- Matte finish
- Brand
- Schluter
- Collection
- DECO-SGC
- Colour
- Satin Anodized
- Browse category
- Moldings & Trims
- Finish
- Matte
- Width
- 0.5
- Length
- 98.5
- Warranty
- 5
- Weight
- 0.91 lb
- SKU
- SGC110AE12
- Material
- Anodized Aluminium
- Pieces per box
- 1
- Indoor use
- Yes
- Use for
- Tile
- Shower approved
- Yes
- Profile
- Decorative profile with support channel for glass pannel
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.