SKU EQHKUR10EB11 colours in DILEX-HKU
Schluter · DILEX-HKU
Schluter - DILEX-HKU Outside Corner 90° with 3/8" (10 mm) Radius - Stainless Steel (V4)
$7.47/ each
Schluter corners — matches your floor to trim out doorways, edges and stairs.
Quantity
1
× $7.47 / eachProduct details
Schluter corners — matches your floor to trim out doorways, edges and stairs.
Schluter-DILEX-HKU is a stainless steel grooved profile for interior wall corners and floor/wall transitions (including countertop/backsplash transitions). DILEX-HKU can be used with floor coverings other than ceramic and natural stone tiles, as long as they are fixed or glued (i.e. not with floating floors).
Key features
- Avoids the need for caulking
- Divides tiled areas that meet at interior corners where limited movement is expected
- Can be installed with tile or other floor coverings as long as they are attached or glued (not with floating floors)
- Has a single anchoring fin with trapezoidal holes that face inward and are embedded in the thin-set mortar
- Has a 3/8" (10 mm) or 1 13/32" (36 mm) radius that prevents water infiltration and dirt accumulation for easy cleaning
- 90° and 135° inside and outside corners, fittings and end caps available
- Material: Stainless Steel (V4)
- 5-year warranty
Glue-down
- Brand
- Schluter
- Collection
- DILEX-HKU
- Browse category
- Corners
- Browse sub-category
- Corners
- Length
- 98.5
- Warranty
- 5
- Weight
- 0.01 lb
- SKU
- EQHKUR10EB
- Material
- Stainless Steel (V4)
- Indoor use
- Yes
- Use for
- Tile
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.
You might also like
Ardex
Ardex - UP 331-21 ProFin 90-Degree Aluminum Corner
$99.70 /each
Prova
Prova - Dual Purpose Square Corner Bright Clear (BCL) 5/16" (8 mm)
$10.22 /each
Prova
Prova - Dual-Purpose Aluminum Square Corner, Satin Titanium - 3/8"
$10.33 /each
Prova
Prova - Dual-Purpose Aluminum Square Corner, Satin Titanium - 1/2"
$9.96 /each
Forbo
Forbo Preformed Concave Corner with 20 mm Radius Colorex Sole 4" (Pack of 5)
$231.04 /each
Schluter
Schluter - DESIGNBASE-SL Inside Corner 90° - Aluminum Anodized Matte 2-3/8" (60 mm)
$14.03 /each
Schluter
Schluter - DESIGNBASE-SL Outside Corner 90° - Stainless Steel (V2) Brushed 4-3/8" (110 mm)
$79.66 /each
Schluter
Schluter - DIADEC Outside Corner 90° - Aluminum Anodized Matte
$40.47 /each