Schluter - DITRA Uncoupling and Waterproofing Membrane - 3' 3" x 16' 5" x 1/8" (Roll of 54 sqft)
Schluter's uncoupling & underfloor heating membranes — brings gentle, even warmth to the floor above it — pair with a compatible thermostat.
Buy now
$2.71 /sq ftor 4 payments of about $33.86 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Need an exact length? Order a custom cut →
Product details
Schluter's uncoupling & underfloor heating membranes — brings gentle, even warmth to the floor above it — pair with a compatible thermostat.
Schluter-DITRA and DITRA-XL are specially designed for use with ceramic and natural stone tiles. It provides an uncoupling function that prevents cracking of tile and grout. Made of polyethylene, DITRA and DITRA-XL serve as a waterproofing layer to protect moisture-sensitive substrates such as plywood/OSB.
The voids under the membrane allow excess moisture and vapor to escape from the substrate - otherwise the tile could be damaged. DITRA and DITRA-XL perform all of these functions, in addition to providing adequate support and load distribution for the tile covering.
Key features
- Provides uncoupling, waterproofing, vapor management and heavy load distribution to maintain the durability and integrity of tiled installations
- DITRA has a nominal thickness of 1/8" (3 mm) - limits tile thickness and height of transitions to lower floor coverings
- Can be installed over concrete, plywood, OSB, gypsum, existing vinyl floors, structural planks, subfloors and radiant floor heating systems
- Features an interlocking rib structure with a non-woven felt underneath that will bond to the substrate without filling the cavities with cement glue
- Quick and easy to install
- few tools required
- Piece size: 39" × 197" (0.13" thick)
- Material: Polyethylene
- Brand
- Schluter
- Collection
- DITRA
- Browse category
- Underlayment & Heating
- Browse sub-category
- Uncoupling & Underfloor Heating Membranes
- Thickness
- 0.125
- Width
- 39
- Length
- 197
- Warranty
- 10
- Coverage
- 50 sq ft / box
- Weight
- 6.61 lb
- SKU
- DITRA5M
- Material
- Polyethylene
- Fibre
- Polyethylene
- Per skid
- 84
- Indoor use
- Yes
- Radiant heat compatible
- Yes
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.