SKU EDIN100AE6 colours in INDEC
Schluter · INDEC
Schluter - INDEC Outside Corner 90° - Aluminum Anodized Matte 3/8" (10 mm)
$8.94/ each
Schluter corners — bridges thresholds and covers expansion gaps for a polished result.
Quantity
1
× $8.94 / eachProduct details
Schluter corners — bridges thresholds and covers expansion gaps for a polished result.
Schluter-INDEC is an anodized aluminum profile for exterior corners and edges of tiled surfaces. The visible surface of the profile has an interior right angle, which provides a modern appearance and interesting contrasts.
Key features
- Prevents tile chipping
- Clean, modern appearance
- Corner pieces can also be used as end caps
- Material: Anodized Aluminum
- Matte finish
- 5-year warranty
MatteGlue-down
- Brand
- Schluter
- Collection
- INDEC
- Browse category
- Corners
- Browse sub-category
- Corners
- Finish
- Matte
- Width
- 2.45
- Warranty
- 5
- Weight
- 0.01 lb
- SKU
- EDIN100AE
- Material
- Anodized Aluminum
- Indoor use
- Yes
- Outdoor use
- No
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.
You might also like
Ardex
Ardex - UP 331-21 ProFin 90-Degree Aluminum Corner
$99.70 /each
Prova
Prova - Dual Purpose Square Corner Satin Clear Anodized (SCA) 5/16" (8 mm)
$10.88 /each
Prova
Prova - Dual-Purpose Aluminum Square Corner, Satin Clear Anodized - 3/8"
$9.76 /each
Prova
Prova - Dual-Purpose Aluminum Square Corner, Satin Titanium - 1/2"
$9.96 /each
Forbo
Forbo Preformed Convex Corner with 20 mm Radius Colorex Kiwi 4" (Pack of 5)
$231.04 /each
Schluter
Schluter - DESIGNBASE-SL Inside Corner 90° - Aluminum Brushed Stainless Appearance 2-3/8" (60 mm)
$14.03 /each
Schluter
Schluter - DESIGNBASE-SL Outside Corner 90° - Stainless Steel (V2) Brushed 4-3/8" (110 mm)
$79.66 /each
Schluter
Schluter - DIADEC Outside Corner 90° - Aluminum Anodized Matte
$40.47 /each