Schluter - KERDI Waterproofing Membrane 3' 3" x 16' 5" - 8 mil (54 sqft)
The Waterproofing Membranes from Schluter — part of a sealed, waterproof shower system from base to wall.
Buy now
$2.87 /sq ftor 4 payments of about $38.75 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Product details
The Waterproofing Membranes from Schluter — part of a sealed, waterproof shower system from base to wall.
Schluter-KERDI is a pliable, sheet-applied, bonded waterproof membrane and vapor retarder with limited crack-bridging capabilities. KERDI features a modified polyethylene (PEVA) core with non-woven polypropylene on both sides to anchor the membrane in the thin-set mortar. KERDI was developed as a waterproofing membrane to be used in conjunction with ceramic and stone tile coverings.
Tiles can be installed directly on KERDI using the thin-bed method. Other trowel-applied covering materials, such as plaster, can also be used. KERDI has been evaluated according to the “Standard Method for the Testing and Evaluation of Volatile Organic Chemical Emissions from Indoor Sources Using Environmental Chambers, Version 1.1” for California Specification 01350 and found to comply with the VOC requirements.
California Specification 01350 is referenced by various green building standards and rating systems.
Key features
- Sheet-applied polyethylene waterproofing membrane and vapor retarder
- Eliminates water damage which can lead to mold and mildew
- Features a modified polyethylene (PEVA) core with non-woven polypropylene on both sides
- Features an anchoring fleece on both sides to anchor the membrane in thin-set mortar
- Ideal for waterproofing in conjunction with tiled surfaces on walls and floors
- KERDI is 8-mil-thick and guarantees uniform thickness
- Piece size: 39" × 197"
- Covers 54 sq ft per box
- Brand
- Schluter
- Collection
- KERDI
- Browse category
- Underlayment & Heating
- Browse sub-category
- Waterproofing Membranes
- Width
- 39
- Length
- 197
- Installation
- Residential
- Warranty
- 10
- Coverage
- 54 sq ft / box
- Weight
- 3.17 lb
- SKU
- KERDI200/5M
- Material
- Modified polyethylene (PEVA) core with non-woven polypropylene on both sides
- Pieces per box
- 1
- Per skid
- 204.000000
- Indoor use
- Yes
- Outdoor use
- No
- Use on
- Wall & Floor
- Use for
- Waterproofing in conjunction with tiled surfaces · Vapor Retarder · In tiled showers, bathtub surrounds, residential steam showers, and other tile applications in wet areas
- Water resistant
- Yes
- Shower approved
- Yes
- Vapour barrier
- No - Is Vapor Retarder
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.