Schluter - QUADEC Outside Corner 90° Aluminum Bright White 3/8" (10 mm)
Schluter's corners in Bright White — bridges thresholds and covers expansion gaps for a polished result.
Product details
Schluter's corners in Bright White — bridges thresholds and covers expansion gaps for a polished result.
Schluter-QUADEC is a finishing and edge-protection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile and a reveal that forms a square outer corner along the surface edge. The profile is available in stainless steel, stainless steel with structured finish, anodized aluminum and textured color-coated aluminum.
QUADEC allows for modern decorative design and interesting contrasts. The profile can be combined with the QUADEC-FS feature strip profile and the DESIGNLINE border profile for further design options. In addition to its decorative effect, the profile protects tile edges against damage caused by mechanical stresses. QUADEC, in stainless steel, is particularly resistant to wear when used as edge protection.
It may also be used as a stair nosing or floor transition profile. In addition, QUADEC is suitable for transitions, corners, or dado coverings with other covering materials; for example, carpet, parquetry, natural stone tiles, or poured epoxy coverings. The integrated joint spacer forms a defined joint cavity with the tile. Note: QUADEC in stainless steel does not feature the integrated joint spacer.
Matching inside/outside corners and connectors are available.
Key features
- Now available in 10’ (3.05 m) lengths
- Prevents tile edges from chipping
- Material: Aluminum
- Bright finish
- 5-year warranty
- Brand
- Schluter
- Collection
- QUADEC
- Colour
- Bright White
- Browse category
- Corners
- Browse sub-category
- Corners
- Finish
- Bright
- Warranty
- 5
- Weight
- 0.02 lb
- SKU
- ED/Q100BW
- Material
- Aluminum
- Pieces per box
- 1
- Indoor use
- Yes
- Outdoor use
- No
- Use on
- Floor & Wall
- Use for
- Prevents tile edges from chipping · Create modern decorative designs, interesting contrasts, and match with tile and grout
- Use with
- QUADEC-FS and/or DESIGNLINE
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.