Colour: Sand PebbleSKU A60SP25 colours in SCHIENE
Schluter · SCHIENE
Schluter SCHIENE Wall Edge Profile with Minimum Reveal Aluminum Sand Pebble 1/4" (6 mm) x 8' 2-1/2"
$17.53/ each
The Corners Edge Profiles from Schluter in Sand Pebble — gives edges, transitions and stair steps a clean, finished line.
Quantity
1
× $17.53 / eachProduct details
The Corners Edge Profiles from Schluter in Sand Pebble — gives edges, transitions and stair steps a clean, finished line.
Backed by Schluter's trade-proven quality, it's a small detail that makes the whole job look professional.
Glue-down
- Brand
- Schluter
- Collection
- SCHIENE
- Colour
- Sand Pebble
- Browse category
- Corners Edge Profiles
- Browse sub-category
- Corners Edge Profiles
- Length
- 98.5
- Warranty
- 5
- Weight
- 0.44 lb
- SKU
- A60SP
- Material
- Aluminum
- Indoor use
- No
- Outdoor use
- Yes
- Use on
- Wall
- Use for
- Tile
- Profile
- Tile Edging Trim
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.
You might also like
Schluter
Schluter ECK-E Heavy-Duty Edge-Protection for Outside Corner 90° Profile Stainless Steel (V2) 1/4" (6 mm) x 1-15/32" x 9' 10"
$144.31 /each
Schluter
Schluter FINEC-SQ Finishing and Edge-Protection Profile with a Squared Reveal Aluminum Ivory 1/2" (12.5 mm) x 8' 2-1/2"
$36.40 /each
Schluter
Schluter JOLLY-JUNIOR Profile without a Joint Spacer PVC Classic Grey 7/16" (11 mm) x 8' 2-1/2"
$4.05 /each
Schluter
Schluter RONDEC-CT Double-Rail Counter Edging Profile Anodized Aluminum Satin Brass 5/16" (8 mm) x 8' 2-1/2"
$55.24 /each
Schluter
Schluter RONDEC-STEP Finishing and Edging Profile with 2-1/4" Vertical Leg Anodized Aluminum Brushed Copper 5/16" (8 mm) x 8' 2-1/2"
$65.79 /each
Schluter
Schluter SCHIENE-STEP Stairs Edge Profile with 1-1/2" Vertical Leg Anodized Aluminum Satin 9/16" (15 mm) x 8' 2-1/2"
$50.86 /each