Crain - Aluminum Drives - 3/16" x 1/8"
The Aluminum Drives from Crain. A quality pick to round out your flooring job.
Product details
The Aluminum Drives from Crain. A quality pick to round out your flooring job.
These solid aluminum nails can be hammered into pre-drilled holes to fasten tackless strip or metal moldings down onto concrete subfloors, or onto tile or stone when necessary. The semi-square body compresses and holds against the walls of a pre-drilled 1/8" hole. For carbide or masonry drill bits used to drill the 3/16" holes for these fasteners, see our No. 224 - 3/16" Solid Carbide Drill with No.
226 - 3/16" Hexagon Adaptor. Fastener dimensions: 3/16" dia. x 7/8" long. Hole size: 3/16" x 1".
Key features
- Solid aluminum nails for fastening tack strip onto concrete, tile, or stone
- Oval head seats in metal moldings with countersunk holes
- Semi-square body compresses against pre-drilled 3/16" hole
- Fastener dim.: 3/16" dia. X 7/8" long. Hole: 3/16" dia. x 1" deep
- Brand
- Crain
- Browse category
- Aluminum Drives
- Browse sub-category
- Aluminum Drives
- SKU
- 783
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No documents available for this product.
No reviews yet for this product. Be the first to review it after your purchase.