Crain - Aluminum Drives - 7/8" x 1/8"
Crain's aluminum drives. A dependable choice to complete your flooring project.
Product details
Crain's aluminum drives. A dependable choice to complete your flooring project.
These solid aluminum nails can be hammered into pre-drilled holes to fasten tackless strip or metal moldings down onto concrete subfloors, or onto tile or stone when necessary. The semi-square body compresses and holds against the walls of a pre-drilled 1/8" hole. For carbide or masonry drill bits used to drill the 1/8" holes for these fasteners, see our No. 223 - 1/8" Solid Carbide Drill with No.
225 - 1/8" Hexagon Adaptor. Fastener dimensions : 1/8" dia. x 7/8" long. Hole size: 1/8" x 1".
Key features
- Solid aluminum nails for fastening tack strip onto concrete, tile, or stone
- Oval head seats in metal moldings with countersunk holes
- Semi-square body compresses against pre-drilled 1/8” hole
- Fastener dim.: 1/8" dia. X 7/8" long. Hole: 1/8" dia. x 1" deep
- Brand
- Crain
- Browse category
- Aluminum Drives
- Browse sub-category
- Aluminum Drives
- SKU
- 780
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No documents available for this product.
No reviews yet for this product. Be the first to review it after your purchase.