Custom Building Products - Epoxy Grout 100% Solids Commercial Part A Ceg-Lite #544 Rolling Fog 1.3 lb
Custom Building Products grout in Rolling Fog — the mortar and setting base that keeps your installation solid for years.
Product details
Custom Building Products grout in Rolling Fog — the mortar and setting base that keeps your installation solid for years.
CEG-Lite 100% Solids Commercial Epoxy Grout provides chemical and stain resistance with a fast cure time for a quick return to service. Its lightweight formula makes it easier to spread than typical epoxy grouts and is water-cleanable. CEG-Lite exceeds ANSI A118.3 performance requirements, is suitable for use on vertical joints without an additive, and can also be used as a mortar.
Its two-component formula combines a Part A pigmented hardener with a Part B consisting of resins and lightweight aggregates. CEG-Lite is compatible with both CEG-Lite Part A and CEG Part A epoxy grout color pigment and hardener products. Formula is patent-pending.
Key features
- Color consistent, stain and chemical resistant
- Easy to spread and clean-up
- No sagging in vertical joints
- Contains recycled LEED contributing materials
- Mix the entire contents of the part A with the 1 gallon part B. Do not mix partial units
- Material: Epoxy
- Brand
- Custom Building Products
- Collection
- CEG-Lite
- Colour
- Rolling Fog
- Browse category
- Setting Materials
- Browse sub-category
- Grout
- Weight
- 1.3 lb
- SKU
- LWCEG544AT-EA
- Material
- Epoxy
- Pieces per box
- 1
- Indoor use
- Yes
- Outdoor use
- Yes - Exterior applications must be protected from rain, snow and other wet conditions for at least 7 days with temperature above 50° F (10° C)
- Use with
- Part B Liquid Epoxy Resin Combined with Aggregates
- Chemical resistance
- Yes
- TVOC emissions
- < 50 g/L
- Certifications
- Greenguard Gold
- LEED
- Contains recycled LEED contributing materials
- Cure time
- 7 hours light traffic · 7 days industrial cleaners · 14 days agressive chemicals
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No documents available for this product.
No reviews yet for this product. Be the first to review it after your purchase.