Custom Building Products - Epoxy Grout Ceg-Lite Part A #186 Khaki 1.3 lb
Custom Building Products grout in Khaki — the mortar and setting base that keeps your installation solid for years.
Product details
Custom Building Products grout in Khaki — the mortar and setting base that keeps your installation solid for years.
CEG-Lite 100% Solids Commercial Epoxy Grout provides chemical and stain resistance with a fast cure time for a quick return to service. Its lightweight formula makes it easier to spread than typical epoxy grouts and is water-cleanable. CEG-Lite exceeds ANSI A118.3 performance requirements, is suitable for use on vertical joints without an additive, and can also be used as a mortar.
Its two-component formula combines a Part A pigmented hardener with a Part B consisting of resins and lightweight aggregates. CEG-Lite is compatible with both CEG-Lite Part A and CEG Part A epoxy grout color pigment and hardener products. Formula is patent-pending.
Key features
- Color consistent, stain and chemical resistant
- Easy to spread and clean-up
- No sagging in vertical joints
- Contains recycled LEED contributing materials
- Material: Epoxy
- Brand
- Custom Building Products
- Collection
- CEG-Lite
- Colour
- Khaki
- Browse category
- Setting Materials
- Browse sub-category
- Grout
- Flooring type
- Ceramic, mosaic, quarry, pavers, porcelain, brick, mini-brick and green marble
- Weight
- 1.3 lb
- SKU
- LWCEG186AT-EA
- Material
- Epoxy
- Colour variation
- Slight variation
- Pieces per box
- 1
- Indoor use
- Yes
- Outdoor use
- Yes
- Use on
- Floors, countertops and walls
- Use for
- For filling joint widths from 1/16" to 1/2" (1.6-13mm)
- Use with
- CEG-Lite is compatible with both CEG-Lite Part A and CEG Part A epoxy grout color pigment and hardener products
- Stain resistance
- Yes
- Chemical resistance
- Yes
- Cure time
- 7 hours light traffic · 7 days industrial cleaners · 14 days agressive chemicals
- Storage
- 21°C - 29°C
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.