Forbo Marmoleum Roll Marbled Real Eiger 6' 6" - 2.5 mm (Sold in Sqyd)
Fall in love with Forbo Marbled Real linoleum flooring in Eiger, offering hard-wearing, low-maintenance performance under a warm matte finish. The Marbled Real line pairs designer colourways with construction you can count on.
Buy now
$7.01 /sq ftor 4 payments of about $15.76 with Klarna or Afterpay · Affirm also at checkout
Subject to approval. Affirm sets its own term and rate. Shown for this estimate — taxes and delivery are added at checkout.
Blank size adds one box. Adjust anytime.
Often bought with this floor
3% off these in your cart when you buy them with your floor.
Free sample · $9.95 flat shipping, up to 3
Need an exact length? Order a custom cut →
Product details
Fall in love with Forbo Marbled Real linoleum flooring in Eiger, offering hard-wearing, low-maintenance performance under a warm matte finish. The Marbled Real line pairs designer colourways with construction you can count on.
Real linoleum is made from linseed oil, pine rosin, wood flour and limestone on a natural jute backing — renewable raw materials rather than PVC. Because the colour goes right through the sheet, wear shows as patina rather than a worn-out print. Forbo finishes its Marmoleum lines with Topshield2, a factory-applied surface treatment: no initial polishing, and routine care is dry sweeping plus damp mopping. Linoleum earns its keep in schools, healthcare and offices, where it takes years of traffic. It is not a wet-area floor, though: the backing is natural jute, so clean it damp rather than wet, deal with standing spills promptly, and avoid rooms where water can pool or rise through the slab.
Key features
- Covers 9 sq ft per box
- Surface treatment: Topshield pro
- Rated for residential, commercial and industrial use
- Brand
- Forbo
- Collection
- Marbled Real
- Colour
- Eiger
- Browse category
- Vinyl
- Browse sub-category
- Linoleum & Vinyl Roll
- Width
- 79
- Installation
- Residential, Commercial and Industrial
- Coverage
- 9 sq ft (1 sq yd)
- Weight
- 5.84 lb
- SKU
- MARE2629
- Backing
- Jute
- Surface treatment
- Topshield pro
- Look
- Marble
- Coverage (sq yd)
- 1.00
- Traffic rating
- Class 23 Domestic Heavy, Class 34 Commercial Very Heavy, Class 43 Industrial Heavy
- Chemical resistance
- Resistant to diluted acids, oils, fats and to the conventional solvents. Not resistant to prolonged exposure to alkalis.
- Slip resistance
- SCOF > 0.5
- Radiant heat compatible
- Yes
- Radiant heat type
- Electronic and Hydronic heat
- Lightfastness
- ≥ 6 (EN ISO 105-B02 method 3)
- Flammability
- Class 1
- Smoke density
- ≤ 450
- Static propensity
- Yes
- Impact sound (IIC)
- 6 dB
- Antimicrobial
- Yes
- TVOC emissions
- ≤ 0.01 mg/m³
- Recycled content
- Marmoleum contains recycled content
- Certifications
- EN ISO 24011, EN 14041:2004
- Commercial warranty (years)
- 30
- Static load limit
- 250 psi, ≤ 0.002"
- Flame spread
- FSR 150, SDC 145
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.
Everything else you'll need
Underlay, trims, adhesive and tools that suit this type of floor. These are not colour-matched to this collection — check the finish before you order.