Mapei - Ultrabond ECO 711 Premium Clear Thin-Spread VCT Adhesive 946 ml
The VCT Adhesives from Mapei — holds your flooring firmly and permanently in place.
Product details
The VCT Adhesives from Mapei — holds your flooring firmly and permanently in place.
Ultrabond ECO 711 has been reformulated to provide even faster dry times, enhanced grab and greater slip resistance. Use to install vinyl composition tile (VCT) on approved substrates as well as over an existing single layer of VCT.
Now a FastTrack Ready™ product, Ultrabond ECO 711 has been formulated for higher moisture resistance, making it suitable for use over fresh concrete slabs with moisture vapor emission rates (MVERs) up to 8 lbs. per 1,000 sq. ft. (3,63 kg per 92,9 m2) per 24 hours.
Key features
- Quick-drying for fast-track VCT installations
- Superior tack and bond to minimize tile movement
- Dries clear so that layout lines remain visible during installation
- High moisture resistance – up to 8 lbs. (3,63 kg) in MVER
- Low-odor formula for use in occupied buildings
- CRI Green Label Plus certified
- Piece size: 5.25" × 5.25"
- Brand
- Mapei
- Collection
- Ultrabond ECO
- Browse category
- Vinyl
- Browse sub-category
- VCT Adhesives
- Width
- 5.25
- Length
- 5.25
- Weight
- 2 lb
- SKU
- 97391000
- Pieces per box
- 1
- Certifications
- Registration # SCS-IAQ-06041
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.