SKU KBZB38E4 colours in KERDI-BOARD-ZB
Schluter · KERDI-BOARD-ZB
Schluter - KERDI-BOARD-ZB U-Shaped Profile for Structures Reinforcement Stainless Steel (V2) 1-1/2" x 8' 2-1/2"
$68.53/ each
Schluter shower moldings — part of a sealed, waterproof shower system from base to wall.
Quantity
1
× $68.53 / eachProduct details
Schluter shower moldings — part of a sealed, waterproof shower system from base to wall.
Schluter-KERDI-BOARD-ZB is a three-sided perforated stainless steel U-channel for tiling and reinforcing open walls.
Key features
- Features three perforated sides, suitable for tiling
- Used to secure and stabilize partitions and other structures made of KERDI-BOARD
- Material: Stainless Steel (V2)
- Water-resistant — suitable for kitchens and baths
- 5-year warranty
Glue-down
- Brand
- Schluter
- Collection
- KERDI-BOARD-ZB
- Browse category
- Moldings & Trims
- Browse sub-category
- Shower Moldings
- Length
- 98.5
- Warranty
- 5
- Weight
- 2.15 lb
- SKU
- KBZB38E
- Material
- Stainless Steel (V2)
- Indoor use
- Yes
- Use for
- Stone and Tile
- Water resistant
- Yes
- Profile
- Perforated Edges U-Shaped Profile
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.
You might also like
Schluter
Schluter - DECO-SGC Shower Support Profile for Glass Partitions Anodized Aluminum Satin 1/2" (12.5 mm) x 9/16" x 8' 2-1/2"
$37.28 /each
Schluter
Schluter - KERDI-BOARD-ZA Finishing U-Shaped Outside Corner 90° - Brushed Stainless Steel (V2) 2"
$28.89 /each
Schluter
Schluter - KERDI-BOARD-ZC Internal Connector - Brushed Stainless Steel (V2) 1-1/2"
$5.63 /each
Schluter
Schluter - KERDI-BOARD-ZFP Profile for Securing Hardware - PVC Plastic 1-3/8" x 8' 2-1/2"
$14.85 /each
Schluter
Schluter - KERDI-BOARD-ZW Angle Profile - Stainless Steel (V2) 8' 2-1/2"
$33.91 /each
Progress Profiles
Progress Profiles - Shower Molding PROBATH PVC White 13/16" (20 mm) x 8' 2-7/16"
$27.12 /each
Schluter
Schluter - SHOWERPROFILE-SB Two-Part Shower Profile with Tapered Edge Stainless Steel (V2) 1/2" (12.5 mm) x 63"
$154.96 /each