SKU VKBZI38E12 colours in KERDI-BOARD-ZC
Schluter · KERDI-BOARD-ZC
Schluter - KERDI-BOARD-ZC Internal Connector - Brushed Stainless Steel (V2) 1-1/2"
$5.63/ each
The Shower Moldings from Schluter — part of a sealed, waterproof shower system from base to wall.
Quantity
1
× $5.63 / eachProduct details
The Shower Moldings from Schluter — part of a sealed, waterproof shower system from base to wall.
Schluter-KERDI-BOARD-ZC is a brushed stainless steel U-channel with a perforated top and smooth bottom that features an anchoring fin; it is used to finish countertops, vanities, or similar structures made of KERDI-BOARD.
Key features
- Features a perforated anchor fin
- Can be used with Schluter-RONDEC or QUADEC finishing profiles
- Exterior corners, fittings, and interior fittings are available
- Material: Stainless Steel (V2)
- Brushed finish
- Water-resistant — suitable for kitchens and baths
- 5-year warranty
BrushedGlue-down
- Brand
- Schluter
- Collection
- KERDI-BOARD-ZC
- Browse category
- Moldings & Trims
- Browse sub-category
- Shower Moldings
- Finish
- Brushed
- Warranty
- 5
- Weight
- 0.03 lb
- SKU
- VKBZI38E
- Material
- Stainless Steel (V2)
- Indoor use
- Yes
- Use for
- Stone and Tile
- Water resistant
- Yes
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.
You might also like
Schluter
Schluter - DECO-SGC Shower Support Profile for Glass Partitions Anodized Aluminum Satin 7/16" (11 mm) x 1/2" (12.5 mm) x 8' 2-1/2"
$34.31 /each
Schluter
Schluter - KERDI-BOARD-ZA Finishing U-Shaped Profile - Brushed Stainless Steel (V2) 2" x 8' 2-1/2"
$87.57 /each
Schluter
Schluter - KERDI-BOARD-ZB U-Shaped Profile for Structures Reinforcement Stainless Steel (V2) 2" x 8' 2-1/2"
$75.20 /each
Schluter
Schluter - KERDI-BOARD-ZFP Profile for Securing Hardware - PVC Plastic 1-3/8" x 8' 2-1/2"
$14.85 /each
Schluter
Schluter - KERDI-BOARD-ZW Angle Profile - Stainless Steel (V2) 8' 2-1/2"
$33.91 /each
Progress Profiles
Progress Profiles - Shower Molding PROBATH PVC White 13/16" (20 mm) x 8' 2-7/16"
$27.12 /each
Schluter
Schluter - SHOWERPROFILE-SB Two-Part Shower Profile with Tapered Edge Stainless Steel (V2) 1/2" (12.5 mm) x 63"
$154.96 /each