Colour: PearlSKU 44047302225 colours in Millwork Wall Finishing System
Tarkett · Millwork Wall Finishing System
Tarkett - Millwork Wall Finishing System - SHU 22 A Shoe Moulding 1-1/2" #22 Pearl - Wall Base 8'
$45.20/ each
The Millwork Contoured Wall Base from Tarkett in Pearl — protects the bottom of the wall and covers the floor's expansion gap.
Quantity
1
× $45.20 / eachProduct details
The Millwork Contoured Wall Base from Tarkett in Pearl — protects the bottom of the wall and covers the floor's expansion gap.
Rich architectural detail and the look of finely milled wood – available at roughly half the installed cost in half the time. And, the Millwork Wall Finishing System is more durable and easier to maintain than real wood – no touch-up or repainting required.
Key features
- 0.25" overall thickness
- Material: Thermoplastic Rubber
- FloorScore certified for indoor air quality
Glue-down
- Brand
- Tarkett
- Collection
- Millwork Wall Finishing System
- Colour
- Pearl
- Browse category
- Moldings & Trims
- Browse sub-category
- Millwork Contoured Wall Base
- Thickness
- 0.25
- Length
- 96
- SKU
- 440473022
- Material
- Thermoplastic Rubber
- Pattern
- Solid
- Design
- SHU 22 A Shoe Moulding 1 1⁄2” 22 Pearl
- Colour tone
- Light
- Pieces per box
- 1
- Per skid
- 80
- Chemical resistance
- Good
- Slip resistance
- SCOF ≥ 0.5
- Lightfastness
- ΔE ≤ 8.0
- Flammability
- Class 1 (mean average CRF: 0.45 w/sq cm or higher)
- Smoke density
- < 450
- FloorScore certified
- Yes
- TVOC emissions
- ≤ 100 µg / m³
- Phthalate content
- No
- Recycled content
- 0.14
- Flame spread
- Class B < 450 smoke
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.
You might also like
Futura Transitions
Futura Transitions - 1/8" Coving Cap Mill Finish Anodized -12'
$11.01 /each
Tarkett
TightLock Carpet TDC 130 3-1/4" #130 Sisal - Wall Base 75'
$2.98 /sq ft$223.14/box
M-D PRO
M-D PRO - Cove Cap, Stainless Steel - 1/10" x 1-3/16" x 8'
$36.00 /each
Tarkett
Cove Caps - CCC TA4 C for 1/4" Thick Carpet #TA4 Gateway 12'
$19.40 /each
Schluter
Schluter - Designbase-SL Wall Base Profile DESIGNBASE-SL - Aluminum Brushed Stainless Appearance 2-3/8" (60 mm) x 8' 2-1/2"
$118.46 /each
Schluter
Schluter - Designbase-SL Wall Base Profile DESIGNBASE-SL - Stainless Steel (V2) Brushed 6-3/8" (160 mm) x 8' 2-1/2"
$226.30 /each
Schluter
Dilex-Ahk Cove Base 3/8 Alum Matte White
$54.73 /each
Schluter
Dilex-Ahk Cove Base 5/16 Alum Dark Anthr
$67.44 /each