CustomTech - Self-Leveling Underlayment for Wood Subfloors Fiber Reinforced TechLevel WSF 50 lb
The Levelers from CustomTech — locks tile and stone down with a strong, reliable bond.
Product details
The Levelers from CustomTech — locks tile and stone down with a strong, reliable bond.
TechLevel-WSF SLU is a high flow, fiber reinforced calcium aluminate cement based, self-leveling underlayment that eliminates the need for reinforcing lath over plywood and OSB on interior wood framed subfloors. It produces a smooth, level substrate ready for the installation of most floor coverings.
Formulated using Controlled Cure Technology, TechLevel-WSF SLU helps eliminate installation problems caused by the free moisture found in traditional underlayment.
Key features
- No lath required for plywood and OSB subfloors
- High strength for 1/4" to 1-1/2" nominal pours
- Low Prep Formula
- Just Sweep, Prime & Pour, no sandblasting required on acceptable surfaces
- Compatible with most radiant heating systems
- Exceeds TCNA and ASTM requirements for ceramic tile and resilient floor covering installations
- 15-year warranty
- Brand
- CustomTech
- Collection
- TechLevel
- Browse category
- Underlayment & Heating
- Browse sub-category
- Levelers
- Warranty
- 15
- Weight
- 50 lb
- SKU
- TLWSF50T
- Mixing ratio
- Mix 4.75 liters of clean, cool water with a 50 lb bag
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.