CustomTech - Self-Leveling Underlayment TechLevel 150 50 lb
The Levelers from CustomTech — the mortar and setting base that keeps your installation solid for years.
Product details
The Levelers from CustomTech — the mortar and setting base that keeps your installation solid for years.
TechLevel 150 is a premium, calcium aluminate based, high quality self-leveling underlayment that achieves greater than 4300 psi compressive. TechLevel 150 levels floors prior to the installation of most floor coverings. This quick setting underlayment can be applied up to 1.5" (3.8 cm) thick in one pour and seeks its own level in minutes.
Formulated using Controlled Cure Technology, TechLevel 150 helps eliminate installation problems caused by the free moisture found in traditional underlayment.
Key features
- Low Prep Formula
- Just Clean, Prime and Pour
- Superior Crack Resistance – Formula reduces shrinkage and minimizes cracks
- 4300 PSI Compressive Strength
- Exceeds ASTM requirements for resilient floor covering installations
- No shotblasting required on acceptable surfaces
- 15-year warranty
- Brand
- CustomTech
- Collection
- TechLevel
- Browse category
- Underlayment & Heating
- Browse sub-category
- Levelers
- Warranty
- 15
- Weight
- 50 lb
- SKU
- TL15050T
- Outdoor use
- No
- Mixing ratio
- Mix 5.2 liters of clean, cool water with a 50 lb bag
Installation — Glue-down
- Acclimate the material and make sure the subfloor is clean, dry and flat.
- Spread the recommended adhesive with the correct-notch trowel; work in small sections.
- Set each piece into the wet adhesive and roll the floor to ensure full transfer.
- Keep traffic off until the adhesive fully cures (check the adhesive label).
Care & maintenance
- Sweep or dry-mop regularly; damp-mop with a pH-neutral cleaner.
- Wipe spills promptly and use felt pads under furniture.
No reviews yet for this product. Be the first to review it after your purchase.